Configuring Drives - Overland Storage NEO 200S User Manual

NEO 200s/400s User Guide
• I/O Stations enabled – The Mail Slots can be enabled (the default), or disabled so
the stations can be utilized as storage slots.
• Host Label Length – The Host Label Length is related to the Bar Code Labels
appearing on the media being used. The default value is 8, but 6 can also be chosen.

Configuring Drives

The following items are in this menu:
• Drive Interface – use this to assign a Port Speed, Port Type, and Loop ID to a Fibre
Channel drive. SAS drives do not require user configuration. For more information on
drive interfaces, refer to
• Control Paths – use this to enable the drive as a control path drive. Each logical
library must have a control path drive.
10400367-001 04/2012
Configuring Your Library – Operator Control Panel
"Host Interfaces" on page
©2012 Overland Storage, Inc.
3-4.
4-22