Service Library Menu - Overland Storage NEO 200S User Manual

NEO 200s/400s User Guide
For information on factory default settings, see
page 5-25.
CAUTION:
data in the library will be lost and will need to be reestablished. Feature Activation Keys will
be retained.
NOTE: Configuration files saved with one version of library firmware may not be compatible with
Since the Web User Interface can be accessed remotely, its implementation will
save/restore the configuration data to/from a file on the host site. When entering commands
on the OCP, the unit is accessed directly. For this reason the OCP implementation will
save/restore the configuration data to/from a USB memory stick that is inserted into the
USB connector on the library controller.

Service Library Menu

IMPORTANT: Some Service Library functions will post a warning message stating that the
library should be taken offline from the host before performing any Service functions. It is up
to the operator to ensure that it is taken offline at the host. Before performing any service
functions, ensure the host is not performing any data writing or retrieval.
The Service Library menu contains the following submenu items:
•
Service Library: Clean Drive
• Service Library: Advanced Diagnostics (for Service Personnel Only)
• Service Library: View Logs
•
Service Library: View Drive Logs
• Service Library: Save Drive Dump
•
Service Library: Perform Diagnostics
• Service Library: Upgrade Firmware
• Service Library: Reboot
Service Library: Clean Drive
If the library is not configured for Auto Clean, this page allows the user to manually clean
the tape drive.
A drive cleaning should only be performed after the library/drive has posted a status
message indicating Cleaning Required.
To manually perform a drive cleaning, perform the following steps:
1. Select a cleaning cartridge listed in the Slot # field.
2. Select a drive listed in the Drive field.
3. Click the Clean button.
10400367-001 04/2012
Be aware that when you restore your library to factory defaults, all configuration
other versions of firmware. It is recommended to save a configuration file each time the
library firmware is upgraded. Restore the library using a configuration file that was saved
with the same version of firmware currently installed in the library.
©2012 Overland Storage, Inc.
Web User Interface Menus
"Configure Library: Save/Restore" on
5-26