C
L
ONFIGURING THE
OADER
Configuring the LoaderXpress
You can change configuration option settings if necessary from the Control Panel. Before
changing any settings, refer to your host system documentation or contact your Technical
Support representative.
The SCSI defaults are: Parity On; DLT1/SDLT1 Bus ID = 4; LTO1 Bus ID = 4; Library Bus
ID = 6.
NOTE:
For complete descriptions of Configuration Options see
:
Descriptions".
Configuration Example – Setting SCSI ID
Turn the module on, and wait until the Power-On Self Test (POST) concludes and the
Default Screen displays:
NOTE: The Default Screen displays a magazine with a cartridge in slot 1.
1) Press Enter to display the Main Menu
X
PRESS
Table 2–1 Power Cord Rating
Europe
Harmonized marked <Har> or nationally certi-
fied
SDLT1: No Tape
Loader Idle
_ _ _ _ _ _ _ _ _
1
LTO 1: No Tape
Loader Idle
_ _ _ _ _ _ _ _ _ _
1
"Configuration Options
10
11
Installation
2-21