Overland Storage NEO 200S User Manual page 88

NEO 200s/400s User Guide
It is recommended that you select Continuous for the Error Log Mode so that all
information for logs and traces will be captured.
Click one of the following:
• Refresh – to cancel the changes made to the screen.
• Submit – to apply the changes made to the screen.
NOTE: The trace level and trace filter selection options are only changeable by Service personnel.
Configure Library: Email Notification
This page allows the user to enter information for email notification. When set up correctly,
Email Notification allows the library to send an email to a designated individual when the
library is experiencing a problem.
The following elements are displayed on the Email Notification page.
• Notify Errors – Select this item to be notified of library errors via email.
• Notify Warnings – Select this item to be notified of library warnings via email.
• To Email Address – Enter the email address of the individual you would like to
receive the errors and/or warnings.
• SMTP Server Address (IPv4 or IPv6) – Enter the address of the email server of the
individual you would like to receive the errors and/or warnings. This can be an IPv4
or IPv6 address, or a host name and domain. If a host name and domain is listed, the
IPv4 or IPv6 address will be resolved from the DNS using that name, and the address
will be stored rather than the name. If the address changes, a new name or a new
address will need to be entered.
• Domain Name – Enter the Domain Name for your library. This field cannot be blank
when using email notification.
NOTE: If you attempt to enter a blank value for the Domain Name, a warning message
Click one of the following:
10400367-001 04/2012
appears that says if you are using Email Notification, then a value is required for the
Domain Name.
©2012 Overland Storage, Inc.
Web User Interface Menus
5-24