Logging In To The Web User Interface; Checking Firmware Level - Overland Storage NEO 200S User Manual

Network storage
Hide thumbs Also See for NEO 200S:
Table of Contents

Advertisement

NEO 200s/400s User Guide

Logging in to the Web User Interface

To log in to the Web User Interface:
1. On your host computer, open an Internet browser.
2. In the browser address field, enter your library's IP Address.
• For DHCP and/or Stateless Autoconfig, use the Operator Control Panel to
• For IPv4, enter your library's IP Address using the 0.0.0.0 format (four octets).
• For IPv6, enter your library's IP Address using the following format:
• For Dual Stack IPv4 + IPv6, enter your library's IP Address for either IPv4 or
3. When the login screen appears, select admin for a User ID and enter secure (or your
new password) for a Password.

Checking Firmware Level

It is important to run the latest level of firmware. To ensure that you are running the latest
levels of library firmware, drive firmware, and SNMP MIB (Management Information
Base) file, complete this procedure:
1. Verify the SNMP MIB file currently installed on your SNMP server.
2. Verify the levels of library and drive firmware currently installed on your library by
completing the following steps:
a. Expand Monitor Library in the left navigation pane of the Web User Interface.
b. Click Library Identity and make note of the library firmware revision.
c. Click Drive Identity and make note of the drive firmware revision.
d. Log out of the Web User Interface.
10400367-001 04/2012
determine the IP Address assigned to your library. Navigate to Monitor > Library
> Network. Scroll down to the library address information and make note of the
address. Enter the IP Address in your internet browser address field to access
your library with the Web User Interface. The library address information may
include one or more of the following address types:
• IP Address (IPv4 static or DHCP)
• Static IPv6 Address
• Link Local IPv6 Address
• Assigned IPv6 address (DHCP or Stateless Autoconfig)
http://[0:0:0:0:0:0:0:0].
IPv6.
IMPORTANT: For security purposes, Overland recommends that you change the
default password.
©2012 Overland Storage, Inc.
Configuring Your Library – Web User Interface
secure
4-10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents