Product Environment; Supported Device Drivers - Overland Storage NEO 200S User Manual

NEO 200s/400s User Guide

Product Environment

The NEO 200s/400s tape libraries are designed to operate in a general business
environment.
The library meets the acoustical requirements for general business area category 2D.
Category 2D states that the library should be installed a minimum of 4 m (13 ft.) from a
permanent work station.
To allow for service access, install the library a minimum of 0.9 m (3 ft.) from all obstacles.
The library is a precision computer peripheral. To ensure maximum longevity of your
library, locate the library away from dust, dirt, and airborne particulates, as follows:
• Keep the library away from high-traffic areas, especially if the floor is carpeted.
Carpeting harbors dust and people walking on the carpet can cause the carpet fibers
and the dust to become airborne.
• Keep the library out of printer and copier rooms because of toner and paper dust.
Additionally, do not store paper supplies next to the library.
• Keep the library away from moving air caused by doorways, open windows, fans, and
air conditioners.
Ensure that the machine covers are always kept closed to minimize any contamination from
airborne particles.

Supported Device Drivers

Device drivers enable the drive to interact with a variety of servers. To properly install a
device driver (if required), refer to the Technical Bulletin located with the drivers. For
applications that use other device drivers, see the application's documentation to determine
which drivers to use.
Overland Storage maintains the levels of device drivers and driver documentation for the
tape drives on the Internet. You can access this material at the web site:
http://docs.overlandstorage.com/neo
10400367-001 04/2012
©2012 Overland Storage, Inc.
Product Environment
A-3