Configuring Your Library - Operator Control Panel; Logging In To The Operator Control Panel; Configuring Logical Libraries - Overland Storage NEO 200S User Manual

NEO 200s/400s User Guide
NOTE: If you click the X in the upper right corner of your internet browser window, you will not log
Configuring Your Library – Operator Control Panel
To configure your library using the Operator Panel, complete these procedures.
Topics in Configuring Your Library – Operator Control Panel:
•

Logging in to the Operator Control Panel

•

Configuring Logical Libraries

• Configuring Library Settings
• Configuring Drives
• Configuring Network Settings
•
Configuring the Access PIN
• Configuring Save/Restore Settings
•
Configuring Date and Time
Logging in to the Operator Control Panel
To change the default network settings using the Operator Control Panel, log in using the
following procedure:
1. When the library is initialized, press the SELECT key to move to the Password
screen.
2. Enter 0000, the default PIN. The top menu screen appears.
3. When finished using the Operator Control Panel, press CANCEL to return to the top
menu screen.
4. When finished, press the DOWN key to select Logout, and press SELECT.
Configuring Logical Libraries
Use this menu item to select the number of logical libraries.
NOTE: The Currently Configured–x section shows the number of logical libraries currently
10400367-001 04/2012
out of the Web User Interface.
configured.
©2012 Overland Storage, Inc.
Configuring Your Library – Operator Control Panel
NEO 400s Only
4-19