Overland Storage NEO 2000e Quick Start Manual

NEO
This document describes how to unpack and install an Overland
Storage NEO 2000e or NEO 4000e tape library into a four-post,
32-inch depth, EIA-310 rack.
WARNING: To reduce the risk of electric shock or damage to
equipment, always remove any power cords while working with
the unit.
AVERTISSEMENT: Pour réduire le risque de choc électrique ou
endommagement de l'équipement, retirez toujours les cordons
électriques en travaillant avec l'appareil.
CAUTION: While working with the unit, observe standard
Electrostatic Discharge (ESD) precautions to prevent damage to
micro-circuitry or static-sensitive devices.
NOTE: Host interface cables are not supplied with the NEO 2000e or
4000e libraries. These cables must be purchased separately.
Step 1: Activate Your Warranty!
It is essential that you activate your warranty. Technical and
warranty support are not available until it is done:
1. Note the product serial number from the box label or on the
product.
2. Go to the Overland Storage web site:
http://www.overlandstorage.com/
Select
3. Service & Support > My Products.
4. At the
Site Login, enter your email address and password,
and click GO.
NOTE: If you are not yet a member, click "New member?" and
follow the instructions given. It's free and easy!
5. Click Register New Product.
6. Fill in the information and click Submit.
IMPORTANT: Within three business days, you'll receive an e-mail
from Overland with your warranty certificate. Follow the
instructions included to complete the process.
10400198-004 03/2011
®
2000e/4000e Tape Library
©2010-11 Overland Storage, Inc.
Enter
Enter
Page 1 of 8