Configuring User Access - Overland Storage NEO 200S User Manual

Network storage
Hide thumbs Also See for NEO 200S:
Table of Contents

Advertisement

NEO 200s/400s User Guide
• Network Mask – Enter the assigned IPv4 Network Mask.
• Gateway address – Enter the assigned IPv4 Gateway address. This address
4. Enter IPv6 settings (if applicable).
• Enable DHCP – Click this item ON to have the IP Address of your library
• Enable Stateless Auto Config – Click this item ON to have the IP Address of
• Static Address – Enter the assigned IPv6 address. The format of an IPv6 IP
• Prefix length – The default prefix length is set to 64, but can be set to any length,
• Gateway address – Enter the assigned IPv6 Gateway address. This address
5. Click one of the following:
• Refresh – to cancel the changes made to the screen.
• Submit – to apply the changes made to the screen.
NOTE: Depending on the changes made, you will either be disconnected and need to login

Configuring User Access

The User Access page is only accessible to the Admin and Service login. Access is denied to
User and Superuser logins.
• The Admin login has access to all library functions except Service Library > Advance
Diagnostics.
• The Service login has access to all library functions including Service Library >
Advance Diagnostics.
To configure access:
1. Click Configure Library > User Access in the left navigation pane.
2. Check the Disable Superuser box to disable the Superuser role for this library.
Check the Disable User box to disable the User role for this library. Uncheck these
boxes to allow these roles access to your library.
3. Choose a Role.
10400367-001 04/2012
allows access outside the local network.
automatically set by the DHCP server.
your library automatically set by the network router.
address is a 128-bit numeric address written as 8 groups of four numbers
separated by colons.
depending upon the address used.
allows access outside the local network.
again, or reboot the library. If a reboot is required, a Warning message will appear after
the Submit button is clicked. The library must be rebooted or the changes will not take
place.
©2012 Overland Storage, Inc.
Configuring Your Library – Web User Interface
4-15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents