Configure Menu; Service Menu - Overland Storage NEO 200S User Manual

Network storage
Hide thumbs Also See for NEO 200S:
Table of Contents

Advertisement

NEO 200s/400s User Guide
Choose Left or Right to unlock the corresponding cartridge magazines. The magazines can
now be removed from the library by gently pulling each magazine out of the library. To
replace a magazine, insert the back of the magazine into the front of the library and gently
push the magazine into the library. The magazine will lock when inserted into the library.
NOTE: After inserting the magazines into the library, you must wait for the library to complete its
If the magazines are not pulled out of the library within 15 seconds after they are unlocked,
the command will cancel and you will have to repeat the process to unlock the magazines.
Control: Re-Inventory
Use this menu item to initiate a scan of the cartridges currently in the library.
NOTE: It may take up to five minutes to complete the library inventory.

Configure Menu

If you choose to use the Operator Control Panel for configuring your library, go to
"Configuring Your Library – Operator Control Panel" on page 4-19
configuring the following items:
• Logical Libraries
• Library Settings
• Drives
• Network
• Set Access PIN
• Set Date and Time

Service Menu

IMPORTANT: These options are for use only by Authorized Overland Technical Support
representatives.
The 2U/4U library is always online, except for when the user enters the Service Library
area. A warning message appears stating that the library should be taken offline from the
host before performing any Service functions. It is up to the operator to ensure that it is
10400367-001 04/2012
inventory before proceeding with normal library operations.
©2012 Overland Storage, Inc.
Operator Control Panel Menus
for information on
5-8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents