Overland Storage NEO 200S User Manual page 83

NEO 200s/400s User Guide
This table covers the specific page elements:
Menu Item
Library Mode
Active Slots
Configure Library: Logical Libraries
To partition your multi-drive library, select the number of logical libraries you would like to
create in your library, then click Submit.
One cartridge magazine cannot be assigned to two logical libraries. If you partition a multi-
drive library, each of the magazines must be assigned to a logical library on a magazine
boundary. The entire magazine must be part of one logical library only. In a fully populated
4U library with four logical libraries, resource assignments will be as follows:
• Logical Library 1 will contain Drive 1 and the lower-left cartridge magazines.
• Logical Library 2 will contain Drive 2 and the upper-left cartridge magazines.
• Logical Library 3 will contain Drive 3 and the lower-right cartridge magazine.
• Logical Library 4 will contain Drive 4 and the upper-right cartridge magazine.
The Mail Slot and the reserved slot are shared among all logical libraries.
NOTE: When reducing the number of drives in your library, update the Logical Library
Updating the Logical Library configuration will also update the drive element addressing
and drive numbering. See
10400367-001 04/2012
Description
Choices are Random and Sequential. If you choose
Sequential, you may also activate Autoload and/or Loop. If
there is more than one logical library, there is a Library
Mode entry for each logical library.
NOTE:
It may be necessary to modify the number of active slots to
agree with the number of slots allowed by your host
software. To modify the number of active slots in your
library, click the drop down list and select the number of
slots you want active in your library. Also, the Auto Clean
function requires the cleaning cartridge to be in a
reserved slot. Reserved slots are created by reducing the
number of active slots.
configuration. This will remove the Attention LED on the front panel and the exclamation
mark on the Home screen indicating that a drive is missing.
"Configure Library: Save/Restore" on page
©2012 Overland Storage, Inc.
If a Logical Library in Sequential Mode contains
more than one drive, only the first drive in the
Logical Library will be utilized.
Web User Interface Menus
2U 4U
X X
X X
5-25.
5-19