NEO 2000e/4000e User Guide
Configuring Email Communications
Before options that send emails can be used, the network settings must be configured and a
SMTP Server address entered.
SMTP Server/Email Configuration
1. From a computer connected to the same network as the NEO library, open a browser
and connect to the Web Management Interface IP address.
2. At the Login screen, enter the default password "2" and click Login.
3. In the Navigation Bar at the top, click Setup.
4. Click Notifications, then click Confirm at the Offline message.
5. In the Email Addresses section, enter the server and email data for your network:
a. Enter the Server Address.
b. Enter up to four Email Addresses to receive email event messages.
c. Change the default Return Address (webtlc@neo) for the event messages to a real
6. Click Submit at the bottom of the screen (you may have to scroll down).
The information is updated immediately.
7. Click Logout next to the Navigation Bar.
10400200-004 04/2013
e-mail address.
NOTE: The webtlc@neo address is placeholder and not meant to be used.
©2003-13 Overland Storage, Inc.
Basic Configuration
3-8