Overland Storage NEO 200S User Manual page 82

NEO 200s/400s User Guide
• Configure Library: Logs & Traces
• Configure Library: Email Notification
• Configure Library: SNMP
• Configure Library: Save/Restore
Configure Library: General
This page allows you to make changes to general library configuration elements. As
changes are made, they will only be applied after the Apply Selections or the Submit button
is selected. After making the selection, a warning page will inform you of the impact of the
proposed change. In some cases a pop-up screen will ask for confirmation. Many changes
will also require a library reboot.
This table shows the general page elements:
Menu Item
Library Name
I/O Station Enabled
(Mail Slot)
Auto Clean Enabled
Bar Code Label Length
Reported To Host
10400367-001 04/2012
Description
Enter the name of the library.
The Mail Slot defaults to enabled. Choosing disabled (no
check mark) adds one more storage slot to the 2U library,
and 3 more storage slots to the 4U library. When the Mail
Slot is disabled, removing or adding media to the library
must be performed by releasing the left and/or right
magazines.
Auto Clean defaults to Disabled. For Auto Clean to function,
a cleaning cartridge (CLNxxxLx) must be resident in a
reserved library slot and Auto Clean must be enabled
(turned on).
NOTE: If Auto Clean is enabled, and a cleaning cartridge is
not resident in a reserved slot, the Auto Clean
Status field in the web System Status screen will
post a Chk Media/Rsvd Slot message.
The default bar code label length is 8, but can be set to 6.
The bar code label length is a reported length. This setting
will cause the host computer to only see the first 6
characters of the label or all 8 characters. This setting does
not affect the bar code label that is shown on any of the
library user interfaces (always shows all 8 characters).
©2012 Overland Storage, Inc.
Web User Interface Menus
2U 4U
X X
X X
X
X X
5-18