Concluding Steps - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Figure 434: Routing cables
Ê Run SATA cable T26139-Y3958-V205 along the drive bays and through the
cable clamp on the server floor as shown.
Ê Run the SATA cable through the cable guide.

12.5.1.8 Concluding steps

Perform the following procedures to complete the task:
Ê Reinstall the system fan holder as described in section
fan holder" on page
Ê Reinstall the air duct as described in section
on page 100.
Ê If applicable, close the front cover and reinstall the ID card as described in
section "Closing the server" on page
TX300 S7 / RX350 S7
387.
Upgrade and Maintenance Manual
"Installing the system
"Installing the system air duct"
110.
Accessible drives
653