Installing The System Air Duct - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Basic hardware procedures
4.7.1.2

Installing the system air duct

Figure 33: Mounting the system air duct (A)
Ê Ensure that the air duct spacer has been installed in the system as described
in section "Mounting the system board" on page 815.
Ê Hold the air duct by the two green grips (see orange arrows).
Ê Lower the air duct into the chassis as shown.
96 Upgrade and Maintenance Manual
TX300 S7 / RX350 S7