System board and components
Ê Open the side / top cover as described in section
on page 77
(rack server) or
server).
Ê Remove the air duct as described in section
on page
98.
14.4.2.3 Removing onboard SAS enabling key
Figure 536: Onboard SAS enabling key mounting location
Ê Firmly pull up on the release lash until the onboard SAS enabling key pops
out of its connector.
804
"Removing the side cover" on page 86
Upgrade and Maintenance Manual
"Removing the top cover"
"Removing the system air duct"
TX300 S7 / RX350 S7
(tower