4.5
Opening the server
V
CAUTION!
Before removing or installing covers, turn off the server and all
●
peripheral devices. Also unplug all power cables from the outlet.
Failure to do so can cause electric shock.
In order to comply with applicable EMC regulations (regulations on
●
electromagnetic compatibility) and satisfy cooling requirements, the
PRIMERGY TX300 S7 / RX350 S7 server must not run while the side
cover is removed.
For further safety information, please refer to chapter
●
information" on page
4.5.1
Rack model
4.5.1.1
Removing the top cover
Figure 14: Removing the top cover (rack server)
TX300 S7 / RX350 S7
49.
Upgrade and Maintenance Manual
Basic hardware procedures
"Important
77