Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 510

Expansion cards and backup units
Figure 330: Connecting the FBU cable to the controller
Ê For easier access to the FBU connector, temporarily remove the SAS RAID
controller from its slot as described in sections
controller" on page 488
Ê Connect the loose end of the FBU cable to the RAID controller (see close-
up).
Ê Reinstall the SAS RAID controller as described in sections
SAS RAID controller" on page 482
page 409.
510
or "Removing expansion cards" on page
or
Upgrade and Maintenance Manual
"Removing the SAS RAID
"Installing expansion cards" on
418.
"Installing the
TX300 S7 / RX350 S7