Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 718

Front panel and external connectors
I
Unlocking and securing the front panel and accessible drives is
illustrated by the example of tower servers. In case of rack servers, the
accessible drive locking bar is located on the side of the drive bay. In this
case, proceed as follows:
Figure 478: Removing the front panel module (rack systems)
Ê Pull up on the locking latch to disengage the accessible drive locking
bar (1).
Ê Fold out the accessible drive locking bar (2).
718 Upgrade and Maintenance Manual
TX300 S7 / RX350 S7