Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 905

Indicator
Global error
indicator
3
CSS indicator
ID indicator
I
Note on the onboard LAN controller
The system board is equipped with a Gigabit Ethernet Controller that
supports transfer rates of 10 Mbit/s, 100 Mbit/s and 1 Gbit/s.
The separate management LAN connector is used as a management
interface (iRMC S3) and is prepared for operation with the Remote
Management. Optionally LAN connector 1 can also be used for iRMC S3
server management.
TX300 S7 / RX350 S7
Status Description
off no critical event (non-CSS component)
prefailure detected
orange on
(non-CSS component)
orange
non CSS component failure
flashing
off no critical event (CSS component)
yellow on prefailure detected (CSS component)
yellow
CSS component failure
flashing
server has been highlighted using
ServerView Operations Manager or the
blue on
ID button on the front panel for easy
identification
Upgrade and Maintenance Manual
Appendix
905