Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 560

Processors
Ê Remove the AC power cords from the PSU cable brackets and disconnect
them from the system as described in section
from the mains" on page
Ê When working on a rack-mounted server, extend it out of the rack as
described in section
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
Ê Bring the server to its horizontal position.
Ê Open the side / top cover as described in section
on page 77 (rack server) or
server).
Ê Remove the air duct as described in section
on page 98.
560
70.
"Extending the server out of the rack" on page
"Removing the side cover" on page 86
Upgrade and Maintenance Manual
"Disconnecting the server
75.
"Removing the top cover"
"Removing the system air duct"
TX300 S7 / RX350 S7
74.
(tower