Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 747

Ê Close the side / top cover as described in section
on page 113 (rack server) or
server).
Ê When working on a rack-mounted server, secure it in the rack as described
in section "Sliding the server into the rack" on page
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
Ê Reconnect the AC power cords to the power supply units and secure them
with PSU cable brackets as described in section
the mains" on page
Ê Inform the customer about changed WWN and MAC addresses. For further
information, refer to section
on page 163.
Ê After replacing the front LAN board in a server running Linux OS, update its
MAC address in the related NIC definition file as described in section
"Updating the NIC configuration file in a Linux environment" on page
Ê If applicable, restore LAN teaming configurations as described in section
"After replacing / upgrading LAN controllers" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
TX300 S7 / RX350 S7
"Mounting the side cover" on page 120
131.
"Looking up changed MAC / WWN addresses"
162.
Upgrade and Maintenance Manual
Front panel and external connectors
"Mounting the top cover"
130.
128.
"Connecting the server to
(tower
160.
166.
"Enabling
747