Removing The 4X 3.5-Inch Hdd Extension Box; Removing The Slimline Odd From The Hdd Extension Box; Installing The Slimline Odd Into The Hdd Extension Box - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Server
Table of Contents

Advertisement

Ê Shut down the server as described in section
page
69.
Ê Remove the AC power cords from the PSU cable brackets and disconnect
them from the system as described in section
from the mains" on page
Ê When working on a rack-mounted server, extend it out of the rack as
described in section
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
Ê Open the side / top cover as described in section
on page 77
(rack server) or
server).
Ê Remove the air duct as described in section
on page
98.
Ê Remove the system fan holder as described in section
system fan holder" on page
I
Removing the front cover is not required in order to replace the slimline
ODD or LSP in the 2x 3.5-inch HDD extension box.

12.7.3.3 Removing the 4x 3.5-inch HDD extension box

Ê Remove all cables from the 4x 3.5-inch HDD extension box backplane.
Ê Remove all cables from the slimline ODD.
Ê Remove the 4x 3.5-inch HDD extension box from the server as described in
section
"Removing the 4x 3.5-inch HDD extension box" on page

12.7.3.4 Removing the slimline ODD from the HDD extension box

Ê Remove the defective slimline ODD from the 4x 3.5-inch HDD extension box
as described in section
on page
703.

12.7.3.5 Installing the slimline ODD into the HDD extension box

Ê Install the new the slimline ODD onto the 4x 3.5-inch HDD extension box as
described in section
box" on page
709.
TX300 S7 / RX350 S7
70.
"Extending the server out of the rack" on page
"Removing the side cover" on page 86
386.
"Removing the slimline ODD from the extension box"
"Installing the slimline ODD into the HDD extension
Upgrade and Maintenance Manual
Accessible drives
"Shutting down the server" on
"Disconnecting the server
75.
"Removing the top cover"
"Removing the system air duct"
"Removing the
74.
(tower
338.
709

Advertisement

Table of Contents
loading

This manual is also suitable for:

Primergy rx350 s7

Table of Contents