Installing The Front Panel Module; Connecting Cables To The Front Panel Module - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Front panel and external connectors
Ê Fold in the front panel module cover (2) until the left locking latch engages
with the front panel frame (3).

13.1.5 Installing the front panel module

13.1.5.1 Connecting cables to the front panel module

Ê If the front LAN connector is to be installed in the new front panel module,
install the front LAN cable as described in section
connector" on page
Ê If the front VGA connector is to be installed in the new front panel module,
install the front VGA cable as described in section
connector" on page
Figure 483: Connecting the front panel cable
Ê Connect the front panel cable to the new front panel module as shown.
722
730.
748.
Upgrade and Maintenance Manual
"Installing the front LAN
"Installing the front VGA
TX300 S7 / RX350 S7