Concluding Software Tasks - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
Ê Reconnect all external cables to the replaced expansion card.
Ê Reconnect the AC power cords to the power supply units and secure them
with PSU cable brackets as described in section
the mains" on page
Ê In order to configure an expansion card that has been installed or replaced,
the card's Option ROM has to be enabled in the system board BIOS. If
applicable, proceed as described in section
page 152.
Ê Enable boot watchdog functionality as described in section
boot watchdog functionality" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
9.4.1.9

Concluding software tasks

Ê Use the nvidia-smi command to determine the health status of the GPGPU
card:
For Windows
Ê Open a command prompt window (cmd.exe) and change the directory to
the following.
cd C:\Program Files\NVIDIA Corporation\NVSMI\
Ê Execute the nvidia-smi -q command:
nvidia-smi.exe -q
For Linux
Ê Open the terminal console and execute the nvidia-smi -q command.
# nvidia-smi -q
A log file will be created and displayed on the screen.
TX300 S7 / RX350 S7
131.
162.
Upgrade and Maintenance Manual
Expansion cards and backup units
128.
"Connecting the server to
"Enabling Option ROM scan" on
156.
"Enabling SVOM
"Enabling
465