Reassembling The Front Panel Module; Reinstalling The Front Panel Module - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Figure 506: Mounting the front VGA connector
Ê Run the front VGA cable through the mounting bracket on the front panel
frame as shown (1).
Ê Secure the front VGA connector with two hexagon bolts (2, see close-up).

13.3.1.6 Reassembling the front panel module

Ê Mount the front panel module cover on the front panel frame as described in
section "Mounting the front panel module cover" on page

13.3.1.7 Reinstalling the front panel module

Ê Reinstall the front panel module as described in section
panel module" on page
TX300 S7 / RX350 S7
723.
Upgrade and Maintenance Manual
Front panel and external connectors
721.
"Installing the front
753