Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 833

Ê Reconfigure your network settings in the operation system according to the
original configuration of the replaced controller (expansion card or onboard).
I
Configuration of network settings should be performed by the
customer.
For further information, please refer to section
settings recovery" on page
Ê If applicable, restore LAN teaming configurations as described in section
"After replacing the system board" on page
TX300 S7 / RX350 S7
808.
Upgrade and Maintenance Manual
System board and components
"Note on network
166.
833