Accessible Drives - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

12

Accessible drives

This chapter provides information on how to install, remove or replace SATA
optical disk drives (ODDs), SAS / USB backup drives and the Local Service
Display (LSD).
Safety notes
V
CAUTION!
Before installing an accessible drive, acquaint yourself with the
●
drive's user documentation.
When inserting an accessible drive into the server, ensure not to
●
pinch or strain any connected cables.
When installing an accessible drive, hold it by its sides. Applying force
●
to the top of the casing may cause failures.
When disposing of, transferring, or returning a backup drive, ensure
●
that all backup media has been removed from the drive.
Do not touch the circuitry on boards or soldered parts. Hold circuit
●
boards by their metallic areas or edges.
Circuit boards and soldered parts of internal options are exposed and
●
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
For further safety information, please refer to chapter
●
information" on page
In this chapter
"Accessible drive bays" on page 606
●
"Installing accessible drives" on page 609
●
"Removing accessible drives" on page 628
●
"Replacing accessible drives" on page 637
●
"Slimline ODD and LSD in Multibay box" on page 639
●
"Slimline ODD and LSD in 2x 3.5-inch HDD extension box" on page 668
●
"Slimline ODD in 4x 3.5-inch HDD extension box" on page 691
●
TX300 S7 / RX350 S7
49.
Upgrade and Maintenance Manual
"Important
605