Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 860

Converting a tower server to a rack server
Ê Mount the server in the rack as described in section
the rack" on page
Ê Reconnect all external cables.
Ê Reconnect the AC power cords to the power supply units and secure them
with PSU cable brackets as described in section
the mains" on page
Ê Update your server's chassis information on the Chassis ID EPROM
integrated into the front panel board. For further information on how to obtain
and use the ChassisId_Prom Tool, refer to section
Prom Tool" on page
Ê Change the chassis model setting to "rack server" as described in section
"Specifying the chassis model" on page
860
128.
131.
165.
Upgrade and Maintenance Manual
"Mounting the server in
"Connecting the server to
"Using the Chassis ID
167".
TX300 S7 / RX350 S7