Figure 157: Closing the 3.5-inch HDD module locking lever
Ê Fold down the lever to lock the HDD module in place.
7.3.6.5
Concluding steps
Perform the following procedures to complete the task:
Ê When working on a tower server, close the HDD bay cover as described in
section
"Installing accessible drive and HDD bay covers" on page
Ê Please observe the notes on RAID rebuild in section
array rebuild" on page
TX300 S7 / RX350 S7
163.
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
"Performing a RAID
117.
273