Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 472

Expansion cards and backup units
Figure 301: Removing a GPGPU card
Ê Press out on the locking latch located on the PCI slot under the GPGPU card
(1).
I
In order to reach the locking latch more easily, it is recommended to
remove memory modules in channels G and H.
Ê While pressing out on the locking latch, carefully pull up on the GPGPU card
in a vertical motion and remove it from its slot (2).
472 Upgrade and Maintenance Manual
TX300 S7 / RX350 S7