Installing The Onboard Sas Enabling Key - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Ê Open the side / top cover as described in section
on page 77 (rack server) or
server).
Ê Remove the air duct as described in section
on page 98.

14.4.1.3 Installing the onboard SAS enabling key

Figure 533: Onboard SAS enabling key (A3C40138194 / SRT:PN-EP1-1000-11-05051)
Figure 534: Onboard SAS enabling key mounting location
Ê Locate the onboard SAS enabling key mounting location on the system
board.
TX300 S7 / RX350 S7
"Removing the side cover" on page 86
Upgrade and Maintenance Manual
System board and components
"Removing the top cover"
"Removing the system air duct"
(tower
801