Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 91

Storing the accessible drive bay cover
Figure 28: Storing the accessible drive bay cover
Ê Place the accessible drive bay cover on the HDD bay cover as shown (1).
Ê Press in on the bottom edge of the accessible drive bay cover until it snaps
in place (2).
Ê To remove the accessible drive bay cover from its resting position, carefully
pull out on the bottom edge of the cover and lift it off.
TX300 S7 / RX350 S7
Upgrade and Maintenance Manual
Basic hardware procedures
91