Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 811

– Expansion cards: refer to the section
page 418
I
Ensure to take note of the controllers' mounting positions and
cable connections for reassembly.
– UFM board: refer to section
I
Remove the UFM spacer from the defective system board and
fasten it to the UFM board with the UFM screw.
– Onboard SAS enabling key: refer to section
enabling key" on page 805
Figure 537: Detaching the system board (A)
Ê Remove the spacer as shown and set aside.
TX300 S7 / RX350 S7
"Removing the UFM board" on page 775
Upgrade and Maintenance Manual
System board and components
"Removing expansion cards" on
"Replacing the onboard SAS
811