Preparing The Heat Sink And Processor - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Two different processor heat sinks are available for the TX300 S7 / RX350 S7
servers:
Standard heat sink
High performance heat sink

11.5.3.1 Preparing the heat sink and processor

When installing a new heat sink
Figure 385: Removing the protective heat sink cover
Ê Remove the protective cover from the heat sink.
V
CAUTION!
Ensure not to touch the thermal paste on the bottom of the heat sink.
TX300 S7 / RX350 S7
V26898-B977-V1
V26898-B977-V3
Upgrade and Maintenance Manual
Processors
for CPUs with a TDP
of up to 130 W
for CPUs with a TDP
of 135 W and up
597