Hard disk drives / solid state drives
Figure 105: Closing the 2.5-inch HDD / SSD module locking lever
Ê Close the locking lever to lock the hard disk drive in place.
7.2.5.5
Concluding steps
Perform the following procedures to complete the task:
Ê When working on a tower server, close the HDD bay cover as described in
section
"Installing accessible drive and HDD bay covers" on page
Ê Please observe the notes on RAID rebuild in section
array rebuild" on page
216
163.
Upgrade and Maintenance Manual
117.
"Performing a RAID
TX300 S7 / RX350 S7