Removing The System Fan Holder - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Fans
Ê When working on a rack-mounted server, extend it out of the rack as
described in section
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
Ê Open the side / top cover as described in section
on page 77 (rack server) or
server).
Ê Remove the air duct as described in section
on page 98.
8.2.2.3

Removing the system fan holder

Figure 243: Removing the system fan holder (A)
Ê Press in on the two locking tabs (1) while slightly lifting up the system fan
holder (2)
386
"Extending the server out of the rack" on page
"Removing the side cover" on page 86
Upgrade and Maintenance Manual
75.
"Removing the top cover"
"Removing the system air duct"
TX300 S7 / RX350 S7
74.
(tower