Sas Backup Drive (Lto3) - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

12.2.5.3 SAS backup drive (LTO3)

Cable
(T26139-)
SAS Backup Drive
SAS / Power cable
Y3969-V401
Backup Drive Power
Cable
Y4029-V1
1
Requires installed Onboard SAS enabling key (see section
enabling key" on page
Ê Connect the SAS and power cables according to your configuration as
shown in the tables above.
Figure 411: Routing cables
TX300 S7 / RX350 S7
Cabling
from
list no.
SAS backup drive
7 (P1, 22-pin
connector)
5 SAS backup drive
800)
Upgrade and Maintenance Manual
Accessible drives
to
System board
connector SAS 1-4
(P2, 36-pin Mini SAS
1
connector)
System board
connector PWR
HDD / ODD
(P1, 4-pin connector)
"Installing the onboard SAS
Cabling
plan
16.2.1
16.2.3
16.2.12
625