Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 832

System board and components
Ê When working on a rack-mounted server, secure it in the rack as described
in section "Sliding the server into the rack" on page
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
Ê Reconnect all external cables.
Ê Reconnect the AC power cords to the power supply units and secure them
with PSU cable brackets as described in section
the mains" on page
Ê Update the system board BIOS and iRMC to the latest version as described
in section "Updating or recovering the system board BIOS and iRMC" on
page 145.
Ê Verify whether the backup data on the Chassis ID EPROM has been
restored to the system board as described in section
information backup / restore" on page
Ê Verify and update time settings as described in section
time settings" on page
Ê Inform the customer about changed WWN and MAC addresses. For further
information, refer to section
on page 163.
Ê After replacing the system board in a server running Linux OS, update the
MAC address of the onboard network controller in the related NIC definition
file as described in section
environment" on page
Ê Enable boot watchdog functionality as described in section
boot watchdog functionality" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
832
131.
158.
"Looking up changed MAC / WWN addresses"
"Updating the NIC configuration file in a Linux
160.
162.
Upgrade and Maintenance Manual
130.
128.
"Connecting the server to
"Verifying system
150.
"Verifying the system
156.
"Enabling SVOM
"Enabling
TX300 S7 / RX350 S7