Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 196

Hard disk drives / solid state drives
Never attempt to disassemble a hard disk or solid state drive.
●
For further safety information, please refer to chapter
●
information" on page
In this chapter
– 2.5-inch HDD / SSD subsystem
"2.5-inch HDD / SSD configurations" on page 197
●
"Installing 2.5-inch HDD / SSD modules" on page 212
●
"Removing 2.5-inch HDD / SSD modules" on page 217
●
"Replacing a 2.5-inch HDD / SSD module" on page 221
●
"Replacing a 2.5-inch HDD SAS backplane" on page 223
●
"Upgrading to 16x 2.5-inch HDD / SSD configurations" on page 240
●
– 3.5-inch HDD subsystem
"3.5-inch HDD configurations" on page 256
●
"Installing 3.5-inch HDD modules" on page 269
●
"Removing 3.5-inch HDD modules" on page 274
●
"Replacing a 3.5-inch HDD module" on page 279
●
"Replacing a 3.5-inch HDD SAS backplane" on page 281
●
"Upgrading to 8x 3.5-inch HDD configurations" on page 292
●
– HDD extension boxes
"HDD extension boxes" on page 306
●
– SAS expander board
"SAS expander board" on page 365
●
196
49.
Upgrade and Maintenance Manual
"Important
TX300 S7 / RX350 S7