Connecting To The Management Network - Polycom RMX 2000 Administrator's Manual

Connecting to the Management Network

To connect a workstation directly to the RMX:
1
Using a LAN cable, connect the workstation to the LAN 2 Port on the
RMX's back panel.
2
Start the RMX Web Client application on the workstation, by entering
the factory setting Management IP address in the browser's address
line and pressing Enter.
3
In the Device Management pane select Networks.
4
Double-click the Management Network entry in the IP Services List.
5
Modify the following parameters using the information supplied by
your network administrator:
— Management IP Address
— Management Subnet Mask
— Management Default Gateway
6
Click OK to save the modifications.
7
Reset the RMX.
Polycom RMX 2000 Administrator's Guide
LAN 2 Port
F-5