Polycom RMX 2000 Administrator's Manual page 84

Chapter 6-Additional Conferencing Information
Table 6-4
6-14
Conference access is set in the system configuration by the flag
ALLOW_ENCRYPT_IN_PARTY_LEVEL as follows:
Participant Level Encryption According to Flag Settings
Encryption is enabled in
Flag Settings Profile
YES Encryption is determined
at the participant level,
therefore encrypted and
non-encrypted participants
can join the conference.
NO Encryption is determined
at the conference level,
therefore only encrypted
participants can join the
conference.
Encrypted Entry Queue Access
To be able to join a conference from an Entry Queue as an encrypted
participant, encryption must be enabled in the Profile assigned to the
Entry Queue. All non-encrypted participants connecting to an encrypted
Entry Queue are disconnected from the MCU.
Encrypted participants can be moved from an encrypted Entry Queue to
the destination conference depending on the destination conference
settings and the setting of the flag in the system configuration.
Encryption is disabled in
the Profile
Encryption is determined at
the participant level, therefore
encrypted and non-encrypted
participants can join the
conference.
Encryption is determined at
the conference level, therefore
only non-encrypted
participants can join the
conference.
Encrypted participants cannot
be moved from an encrypted
Entry Queue to this
conference.