Polycom RMX 2000 Administrator's Manual page 259

Table C-10 Event Fields for Events 17, 23 - H323 PARTICIPANT CONNECTED,
SIP PARTICIPANT CONNECTED (Continued)
Field
Participant Status
Capabilities
Remote
Communication
Mode
Secondary Cause
Polycom RMX 2000 Administrator's Guide
Description
The participant status, as follows:
1 - Connected
8 - Secondary - the participant could not connect the
video channels and is connected via audio only
Not supported.
Always contains the value 0.
Not supported.
Always contains the value 0.
This field is only relevant if the Participant Status is
Secondary.
The cause for the secondary connection (not being able
to connect the video channels), as follows:
11 - The incoming video parameters are not compatible
with the conference video parameters
13 - The conference video settings are not compatible
with the endpoint capabilities
14 - The new conference settings are not compatible
with the endpoint capabilities
15 - Video stream violation due to incompatible annexes
or other discrepancy
16 - Inadequate video resources
17 - When moved to a Transcoding or Video Switching
conference, the participant's video capabilities are not
supported by the video cards
18 - Video connection could not be established
24 - The endpoint closed its video channels
25 - The participant video settings are not compatible
with the conference protocol
26 - The endpoint could not re-open the video channel
after the conference video mode was changed
27 - The gatekeeper approved a lower bandwidth than
requested
28 - Video connection for the SIP participant is
temporarily unavailable
255 - Other
C-23