Polycom RMX 2000 Administrator's Manual page 113

6
Click the DNS button.
7
In the DNS field, select Specify to define the DNS parameters.
8 View or modify the following fields:
Table 8-3 Management Network Properties – DNS Parameters
Field
MCU Host Name
Shelf Management
Host Name
DNS
Polycom RMX 2000 Administrator's Guide
Description
Enter the name of the MCU on the network.
Default name is RMX
Displays the name of the entity that manages the
RMX hardware. The name is derived from the MCU
host name. Default is RMX_SHM.
Select:
•
Off – if DNS servers are not used in the network.
• Specify – to enter the IP addresses of the DNS
servers.
Note: The IP address fields are enabled only if
Specify is selected.
8-7