Diagnostics Monitoring; Mcu Monitor - Polycom RMX 2000 Administrator's Manual

Chapter 12-Hardware Monitoring

Diagnostics Monitoring

12-14
A hardware component's test status can be viewed in the Diagnostics Test
Monitoring section before, during and after tests have been initiated. Test
results will only be displayed after tests are completed. The Diagnostic
Tests Monitoring section is comprised of three tabs: MCU Monitor, Cards
Monitor and Error Buffer, which are further described below.

MCU Monitor

The MCU Monitor tab lists the status of all the cards that can be tested in
Diagnostic Mode. Described below are the columns:
Table 12-9 Tests Monitoring - MCU Monitor Parameters
Column Description
Card The card's slot number, i.e. 5 - slot where the RTM IP
card resides.
Pass Indicates the number of tests that the card passed
successfully.
Fail Indicates the number of tests that the card failed.
Status The card's current test status: No test running or Test in
progress.