Polycom RMX 2000 Administrator's Manual page 112

Chapter 8-Network Services
8-6
Table 8-2 Management Network Properties – Routes Parameters
(Continued)
Field
Static The system uses Static Routes to search other networks for
Routes endpoint addresses that are not found on the local LAN.
Table
Up to five routers can be defined in addition to the Default
Router. The order in which the routers appear in the list
determines the order in which the system looks for the
endpoints on the various networks. If the address is in the
local subnet, no router is used.
To define a static route (starting with the first), click the
appropriate column and enter the required value.
Router IP
Address
Remote IP
Address
Remote
Subnet
Mask
Remote
Type
Description
Enter the IP address of the router.
Enter the IP address the entity to be
reached outside the local network. The
Remote Type determines whether this
entity is a specific component (Host) or a
subnetwork (Network).
•
If Host is selected in the Remote Type
field, enter the IP address of the
endpoint.
•
If Network is selected in the Remote
Type field, enter of segment of the other
network.
Enter the subnet mask of the remote
network.
Select the type of router connection:
•
Network – defines a connection to a
router segment in another network.
• Host – defines a direct connection to an
endpoint found on another network.