Polycom RMX 2000 Administrator's Manual page 65

Table 5-6 Participant Properties - Channel Status Parameters (Continued)
Field
Channel Used
(cont.)
Polycom RMX 2000 Administrator's Guide
Description
Columns:
•
Faulty – A red exclamation point indicates a faulty
channel condition. This is a real-time indication;
when resolved the indication disappears. An
exclamation point indicates that further investigation
may be required using additional parameters
displayed in the Advanced Channel Status tab.
•
Bit Rate – The actual transfer rate for the channel.
•
Packet Loss – The accumulated count of all packets
that are missing according to the RTCP report since
the channel was opened. This field is relevant only
during the connection stage and does not display
faulty indications.
•
Fraction Loss (Peak) – The ratio between the
number of lost packets and the total number of
transmitted packets since the last RTCP report. Peak
(in parentheses) indicates the highest ratio recorded
since the channel was opened.
•
Number of Packets – The number of received or
transmitted packets since the channel has opened.
This field does not cause the display of the faulty
indicator.
•
Jitter (Peak) – Displays the network jitter (the
deviation in time between the packets) as reported in
the last RTCP report (in milliseconds). Peak (in
parentheses) reflects the maximum network jitter
since the channel was opened.
•
Latency – Indicates the time it takes a packet to
travel from one end to another in milliseconds
(derived from the RTCP report).
5-13