Polycom RMX 2000 Administrator's Manual page 233

Category Code
DNS Agent – RESET_MCU_INTERNAL
General
RESET_MCU_BY_OPERATO
R
RESET_MCU_BY_TERMINAL
MCUMngr– CFG_CHANGED
General
RESTORING_DEFAULT_
FACTORY
AA_PATCHED_VERSION
AA_NO_TIME_
CONFIGURATION
AA_ILLEGAL_MCU_VERSION
AA_PRIVATE_VERSION
DEBUG_MODE
DEBUG_CFG_EXIST
AA_RUNNING_VERSION_
MISMATCHES_CURRENT_
VERSION
Polycom RMX 2000 Administrator's Guide
Description
•
Reset cause unknown : [reset
source]\Restore Factory Defaults - [mcu
restore name]\CM_Loaded indication
repeated; boardId: [boardId]\reset from
Cards process - simulation\No connection
with MPM; board Id:[boardId]\SmMfaFailure
- boardId: [boardId]. Status: [status], problem
bitmask: [problemBitMask]\MPM failure,
boardId: [slotId]\Switch failure\No connection
with Switch.
MCU reset was initiated by a system user.
MCU reset was initiated by Terminal command
[reset].
System configuration flags were modified.
Reset the MCU.
Default system settings will be restored once
Reset is completed.
The software contains patch(es).
Failed to read MCU time configuration file
([status]).
MCU Version: [Major.Minor.release.internal].
A private version is loaded: [private description].
DEBUG mode enabled:
•
System is running in DEBUG mode.
•
System DEBUG mode initiated.
System is using DEBUG CFG flags.
Fallback version is being used. Restore current
version. Version being used: [running version];
Current version: [current version].
B-7