Selecting The Conference Lecturer; Lecture Mode Monitoring - Polycom RMX 2000 Administrator's Manual

Chapter 6-Additional Conferencing Information

Lecture Mode Monitoring

6-10

Selecting the Conference Lecturer

A conference can be set to Lecture Mode when:
• Defining a new ongoing Conference, after the adding or defining the
participant to be designated as lecturer
• During an ongoing conference, after the participant (to be designated
as lecturer) has connected to the conference.
To enable Lecture Mode for the Conference:
In the Conference Properties - Participant dialog box, select the Lecturer
from the list.
A conference in which the Lecture Mode is enabled is started as any other
conference. The conference runs as an audio activated Continuous
Presence conference until the lecturer connects to the conference. The
selected video layout is the one that is activated when the conference
starts. Once the lecturer is connected, the conference switches to the
Lecture Mode.