Configuring The Workstation - Polycom RMX 2000 Administrator's Manual

Appendix F-Configuring Direct Connections to RMX

Configuring the Workstation

F-2
The administrator's Login name, Password, viewing and system
permissions on the Permanent Management Network are the same as those
on the Management Network.
Once logged in, the RMX Web Client behaves as if the administrator had
logged in on the Management Network.
Connection to the Permanent Management Network bypasses LAN and
Firewall security. Strict control of access to LAN 3 port is recommended.
The following procedures show how to modify the workstation's
networking parameters using the Windows New Connection Wizard.
For non-Windows operating systems an equivalent procedure must be
performed by the system administrator.
Before connecting directly, you must modify the IP Address, Subnet Mask
and Default Gateway settings of the workstation to be compatible with
either the RMX's Default Management Network or Permanent Management
Network.
To modify the workstation's IP addresses:
1
In the Windows Start Menu, select Settings > Network Connections.
2
In the Network Connections window, double-click the Local Area
Connection that has Connected status.